The Indonesian Halal Product Assurance Organizing Agency (BPJPH) has issued Decree No. 373 of 2026, establishing guidelines for the implementation of the Halal Product Assurance System (Sistem Jaminan Produk Halal or SJPH) for medical devices and Household Health Products (PKRT).
The guideline sets out criteria for determining which medical devices are subject to halal certification and provides detailed requirements covering materials, production processes, product controls, documentation, monitoring, and evaluation.
The Decree also contains phased implementation dates based on medical device risk classification. However, these dates should be read together with Government Regulation No. 40 of 2026, which was issued subsequently and revised the implementation timeline for mandatory halal certification.
Read the full guideline here: Guidelines on the Implementation of the Halal Product Assurance System for Medical Devices and Household Health Products.(PDF)
The document is available in Indonesian only. An official English translation is currently unavailable.
Purpose of the Guideline
To establish the Halal Product Assurance System requirements applicable to medical devices and Household Health Products in Indonesia.
The guideline provides criteria for determining whether medical devices are subject to halal certification and outlines the controls Business Actors are expected to establish when pursuing halal certification.
Medical Devices Subject to Halal Certification
According to the guideline, medical devices subject to halal certification must meet the following criteria:
- The product originates from animals, contains animal-derived components, and/or contains alcohol.
- The product enters the human body and/or comes into direct contact with human body parts.
- The product is used in religious rituals (ibadah mahdhah) that require freedom from hadas and najis, where the halal status of the product may affect the validity of the ritual, such as prayer or tawaf.
Practical Interpretation
The criteria should be considered together.
The presence of animal-derived ingredients, alcohol, or direct contact with the human body should therefore not be assessed in isolation. The intended use of the medical device in connection with the relevant religious practices is also an important consideration.
Medical devices that do not fall within the mandatory halal certification criteria are not subject to further assessment of materials and manufacturing processes, additional halal-related labeling requirements, or related reporting obligations under this framework.
Products That Do Not Meet Halal Requirements
Medical devices that fall within the relevant certification criteria but:
- Contain prohibited materials
- Contain materials whose halal status cannot be confirmed
- Are manufactured using processes that do not comply with halal requirements
may still be distributed and traded, provided the required Non-Halal statement is displayed in accordance with applicable regulations.
Key SJPH Requirements
A. Commitment and Responsibility of Business Actors
Business Actors must establish a written commitment to consistently implement and continuously improve halal manufacturing practices.
Requirements cover:
- Halal Policy
- Responsibilities of Business Actors
- Human Resource Development
Business Actors are expected to minimize and eliminate non-halal elements and comply with applicable halal regulations.
B. Material Controls
Materials used in medical devices and Household Health Products may originate from animals, plants, microbes, or materials produced through chemical, biological, or genetic engineering processes.
Business Actors must identify and control relevant materials, including:
- Raw materials and additives
- Packaging materials that directly contact materials or finished products
- Lubricants, grease, and sanitizers that directly contact materials or products
- Cleaning materials used under applicable shared-facility conditions
- Media used to validate cleaning effectiveness where applicable
Supporting documentation may include:
- Halal certificates or registered foreign halal certificate numbers
- Manufacturing process flowcharts
- Product composition
- Certificates of Analysis
- Material Safety Data Sheets
- Halal questionnaires
- Declarations confirming the absence of animal-derived ingredients
- Laboratory test results
- Other relevant supporting documentation
Business Actors must verify the validity, consistency, issuing body, certificate number, and applicability of supporting documentation.
Animal-derived materials must also comply with applicable requirements relating to halal animal sources and slaughtering practices.
The guideline further provides specific requirements for microbial materials and ethanol. Ethanol may be used where it is not derived from the liquor industry, does not pose a medical hazard, and is not misused.
C. Halal Production Process
Business Actors must establish documented procedures to maintain halal integrity throughout production.
Key requirements include:
- Separation of facilities and equipment used for halal and non-halal products, subject to applicable shared-facility provisions
- Cleanliness and freedom from najis and non-halal materials
- Appropriate receipt, storage, and handling controls
- Halal-compliant packaging processes
- Written procedures covering purchasing, receipt, storage, production, cleaning, transportation, traceability, and product handling
- Appropriate cleaning and purification where equipment or facilities become contaminated with najis
Equipment used for products containing pork must not be used interchangeably with equipment for non-pork products, even after sterilization.
Shared production facilities may be used under specified conditions for products not submitted for halal certification, provided applicable restrictions and documentation requirements are met.
D. Product Requirements
Finished products must:
- Use materials that comply with applicable halal requirements
- Be manufactured and stored under conditions that prevent contamination with non-halal materials
- Be safe for their intended use
- Use product names, symbols, logos, and images that do not mislead consumers or conflict with applicable Islamic principles
Packaging must be clean, free from objectionable odors, and must not adversely affect product quality or safety.
Repacked or relabeled products may be submitted for halal certification where the underlying product already has a Halal Certificate, registered foreign halal certificate, or qualifies for an exemption.
Medical devices or Household Health Products distributed without packaging must be accompanied by the relevant halal certification documentation and a delivery note identifying the quantity, product type, and destination.
Products subject to halal certification must display the applicable Halal Label in accordance with regulatory requirements.
E. Monitoring and Evaluation
Business Actors must establish and maintain documented traceability procedures for certified halal products.
Decision Tree
The guideline includes a decision tree for determining whether a medical device is subject to halal certification.
Please refer to Pages 18–19 of the guideline.
The decision tree is available in Indonesian only, and no official English translation is currently available.
Updated Implementation Timeline
Decree No. 373 of 2026 refers to the following phased dates:
- Class A medical devices and Household Health Products: 18 October 2026
- Class B medical devices: 18 October 2029
- Class C medical devices: 18 October 2034
However, Government Regulation No. 40 of 2026, issued subsequently, amended the implementation timeline for mandatory halal certification.
The revised deadlines for medical devices are:
| Medical Device Classification | Revised Deadline |
|---|---|
| Class A | 17 October 2028 |
| Class B | 17 October 2029 |
| Class C | 17 October 2034 |
Companies should therefore refer to the updated timelines under Government Regulation No. 40 of 2026 when planning mandatory halal certification activities.
Implications to Clients
The guideline provides important detail on the substantive requirements companies should prepare for when seeking halal certification, while Government Regulation No. 40 of 2026 provides the updated implementation deadlines.
Business Actors intending to obtain halal certification should consider beginning preparations early, particularly in relation to:
- Material mapping and supporting documentation
- Halal status of animal-derived materials and alcohol
- Supplier documentation
- Production and cleaning controls
- Facility and equipment segregation
- Traceability procedures
- Packaging and labeling
- Internal halal policies and responsibilities
For Class A medical devices, the mandatory halal certification deadline has been extended to 17 October 2028, providing additional preparation time.
Companies should nevertheless assess their product portfolios against the eligibility criteria in the guideline and begin gathering the required evidence and implementing appropriate manufacturing controls in advance of the applicable deadline.
For Inquiries
For inquiries or support regarding medical device regulatory requirements in Indonesia, please contact sales@andamanmed.com.
